The important thing in this case, before starting work, is to close the general valve water positioned before the water clock by the best company. After that, it would be wise to turn on any faucet in the room where it is needed. Replace the water valve with a new one. If water is still coming out of the tap, you will need to close the water valve on your water tank as well or wait for the water to run out. In general, there are two registry components. Water that needs to be changed. The sealing rubber and all the repair:
Rubber And Repair For Water Register.
- Sealing rubber: It is a small component that cleans the water when the valve is closed. When the component is defective, leaks and leaks can be observed through the register.
- Water valve repair: It is a component full of parts and serves to replace all defective items without breaking the wall. In general, the registry repair is changed when the eraser is changed. Sealing does not solve the problem when the valve does not close or does not open correctly or when the mechanism is buried.
How To Replace The Water Log Repair?
With the general registration of the house, kitchen, bathroom, or service area closed, remove the defective registration with help from a screwdriver. Now remove the defective register mechanism from the wall by turning it counterclockwise and using a spanner. Load and rotate registry repair. Water clockwise to the end and tighten the repair without excessive force. To finalize the replacement of the defective damper, place the finish on the damper and test the water system. If it is still leaking, it may be necessary to use a thread sealant on the bonnet to avoid emergency service.
How To Change The Rubber Of The Water Register?
When the water valve needs to be closed tightly, it continues to drip or release water through the hydraulic system, water is wasted, and maintenance is required. Sometimes not. We need to change the entire water valve; in some cases where the replacement of rubber, also known as leather, seals or repair bushing, already fixes the sealing problem and allows.
That the valve is closed entirely without wasting water. To do this without the help of a hydraulic installer, you will need to close the main valve and the water box valve and then unscrew.
The Top Of The Leaking Registry
First, remove the finish from the registry; now removes the defective register mechanism from the wall by turning it counterclockwise. Do this using a griffin wrench. Remove the spent rubber and place the new one. Eraser in place, turn water valve repair clockwise all the way.
Additional Tips And Information
If necessary, you can use an anti-seize spray of your choice on rusty registers to facilitate the replacement of its components if you cannot find registry repair. For replacement, you can also choose to purchase universal hydraulic repairs that allow you to change different models of record repairs without breaking the wall.