There are few things in life that will last as long, or be more important than your roof. Asphalt shingle roofs can last for decades if properly maintained and installed by a professional roofer. In this blog post, we will discuss asphalt shingle Residential Roofing System Installation canton ga and home siding installation tacoma wa: The Complete Guide to help you make an informed decision about the type of Asphalt shingle roofing system is right for you!
The History of Asphalt Shingle Roofing
Asphalt shingle roofing entered the market in the late 1800s. It was first used as a secondary type of roof covering for flat roofs. Then, it evolved into its current form which is commonly known as “architectural” asphalt shingles today.
The Advantages of Asphalt Shingle Roofing
There are many advantages to deciding on an asphalt shingle roof system:
Asphalt shingles have very high fire resistance (Class A). They will often last much longer than other types of roof materials and can be recycled at the end of their life cycle. There are many styles and colors available from most manufacturers supplying the market. Most asphalt shingle roof systems only need to be replaced every 30-40 years.
Asphalt shingles are relatively inexpensive compared to other types of roofs covering materials. For example, Slate roof tiles can cost around $3-$5 per sq ft while a similar sized asphalt shingle will usually only cost around $1-$2 per sq ft. Asphalt shingles are also much lighter and easier for a crew with hoists to handle versus slate or tile roofs.
Asphalt shingles create less waste than most other types of roofing material styles when they need to be removed from your home. There is no mixing of different components required unlike some metal and concrete roofs that require saw cutting before being loaded up on dumpsters for transport off site.
How to Safely Remove Asphalt Shingle Roofs
If you are looking to have your asphalt shingle roof removed for remodeling or repair (or any other reason), always hire a professional to perform the services.
When To Replace Your Asphalt Shingles
Most asphalt shingles should be replaced anytime there are visible signs of wear and tear. Some of these giveaways include: cracked, curled, or missing granules on the surface; curving of tile tabs; bald spots; bubbling and blistering paint in the surrounding areas of nail pops. If you experience any of these issues with your existing asphalt shingle, it may be time to replace them before a more serious issue develops such as a roof leak.
What To Consider Before Replacing Your Roof Shingles
Before deciding if you need to replace your current asphalt shingles, consider these factors: If the granules are missing in sections of your asphalt shingle roof (usually on the front or western side of the roof) it is likely that your underlying deck was not properly maintained and sealed from moisture penetration. This is typically caused by an improper flashing installation or water leak into the attic space causing damage. While this kind of damage can be repaired, it’s better to prevent it from happening than having to repair it after the fact. It may be time for replacement if any of these issues occur with your existing shingles: Curled tabs Missing tabs Cracked Voids (indicating possible moisture intrusion under the shingle) Loose tabs Cracked or split granules
How To Install Asphalt Shingle Roofing
Metal roof installation cedar falls ia is a fairly straight forward process. Roofing edmonton can usually be done in about three days and requires very few tools to accomplish. Before installing your new asphalt shingles, make sure that your existing roof deck is prepped well with insulation and ventilation holes cut where needed for ridge vents, soffit vents and wall vents in accordance with local building codes.
This will ensure that heat doesn’t build up under your roof system during hot summer months causing premature wear and tear on your new roof shingles. Also check all of the old membrane nails to make sure that they are not too rusty or have decay from moisture penetration. If they do, it is necessary to remove them as completely as possible and replace with screws (not nails) for better holding power.
